Martel LC 100 Loop Calibrator

The Martel Electronics LC-100 gives innivative, capable elements to make your alignment work less demanding. A modest bunch of obviously stamped keys give access to the full usefulness of the unit.To empower remote adjustment of gadgets and procedures, the LC-100 elements programmed STEP and RAMP yield modes, which computerize either a discrete 4-8-12-16-20-16-12-8-4 mA step yield, or two velocities of a direct 4-20-4 mA slope yield, individually. At least one straightforward pushes of the AUTO key (1) are all that are expected to get to this efficient function

1. Very high accuracy – ±0.015% of reading.
2. Very high resolution – 0.001mA / 0.001V.
3. % Error function- eliminates manual error calculation.
4. Extended adjustment range- digital knob anduser-selectable decade output allow both large and incremental (0.001 mA step) output changes.
5. Reads 0 to 28.000 VDC.
6. Built in 250 Ohm resistor facilitates calibration of HART™ devices.
7. Remote calibrations through Automatic Step and Ramp functions.
8. Loop power measurements capability.
9. Simulates powers, and measures two-wire transmitters.
10. Five preset outputs(4,8,12,16,20 mA)